Care and Maintenance
 
Care & Maintenance for:
Powder Coated | Phenolic Core | Plastic Laminate | Solid Plastic | Stainless Steel
Powder Coated  Print this Page

To provide Powder Coated toilet partitions with the proper care and maintenance, the following instructions must be followed:

All four surfaces should be cleaned with a mild liquid soap only.  The finish should then be wiped and dried.  In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape.

Under no circumstance should the following agents be used:
bulletAbrasive powders or scouring pads
bulletWater closet cleaners
bulletCeramic tile cleaners
bulletSolutions containing more than 1% by volume of ammonia
bulletSolutions containing acids or lye
bulletSolutions containing enzymes
If the above instructions are adhered to, our product shall provide years of dependable service. We  shall not accept responsibility for product failure if the above instructions are not followed.

TOP
Phenolic Core  Print this Page

To provide Phenolic Core toilet partitions with the proper care and maintenance, the following instructions must be followed:

All four surfaces should be cleaned with a mild liquid soap only.  The finish should then be wiped and dried.  In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape.

Under no circumstance should the following agents be used:
bulletAbrasive powders or scouring pads
bulletWater closet cleaners
bulletCeramic tile cleaners
bulletSolutions containing more than 1% by volume of ammonia
bulletSolutions containing acids or lye
bulletSolutions containing enzymes
If the above instructions are adhered to, our product shall provide years of dependable service. We shall not accept responsibility for product failure if the above instructions are not followed.

TOP
Plastic Laminate  Print this Page

To provide Plastic Laminate toilet partitions with the proper care and maintenance, the following instructions must be followed:

All four surfaces should be cleaned with a mild liquid soap only.  The finish should then be wiped and dried.  In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape.

Under no circumstance should the following agents be used:
bulletAbrasive powders or scouring pads
bulletWater closet cleaners
bulletCeramic tile cleaners
bulletSolutions containing more than 1% by volume of ammonia
bulletSolutions containing acids or lye
bulletSolutions containing enzymes
If the above instructions are adhered to, our product shall provide years of dependable service. We shall not accept responsibility for product failure if the above instructions are not followed.

TOP
Solid Plastic  Print this Page

To provide Solid Plastic toilet partitions with the proper care and maintenance, the following instructions must be followed:

All four surfaces should be cleaned with a mild liquid soap only.  The finish should then be wiped and dried.  In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape.

Under no circumstance should the following agents be used:
bulletAbrasive powders or scouring pads
bulletWater closet cleaners
bulletCeramic tile cleaners
bulletSolutions containing more than 1% by volume of ammonia
bulletSolutions containing acids or lye
bulletSolutions containing enzymes
If the above instructions are adhered to, our product shall provide years of dependable service. We shall not accept responsibility for product failure if the above instructions are not followed.

TOP
Stainless Steel  Print this Page

In order to provide Stainless Steel toilet partitions with the proper care and maintenance, the following instructions must be followed:

All four surfaces should be cleaned with a mild liquid soap only.  The finish should then be wiped and dried.  In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape.

Under no circumstance should the following agents be used:
bulletAbrasive powders or scouring pads
bulletWater closet cleaners
bulletCeramic tile cleaners
bulletSolutions containing more than 1% by volume of ammonia
bulletSolutions containing acids or lye
bulletSolutions containing enzymes
If the above instructions are adhered to, our product shall provide years of dependable service. We shall not accept responsibility for product failure if the above instructions are not followed.

TOP