If you need it, you can download it for FREE by clicking this logo.
 |
 |
| 7301
Towel Pin Extends 4 5/8” (120 mm) from wall. Technical Data Sheet |
7320
Soap Dish Drawn, one-piece soap dish welded to support arm and flange. Has two drain holes and two ridges to support bar of soap. 4 1/4” (110 mm) wide, 2” (50 mm) high; projects 4” (100 mm) from wall. Technical Data Sheet |
 |
 |
| 7335
Toothbrush and Tumbler Holder Similar to 7320 Soap Dish. Has 2 1/4” (60 mm) diameter hole in center of unit to hold tumbler. Accommodates 6 toothbrushes. 4 1/4”x 2” (110 x 50 mm); projects 4” (100 mm) from wall. Technical Data Sheet |
7340
Single Robe Hook Hook extends 1 5/8” (40 mm) from wall. Technical Data Sheet |
 |
 |
| 7345
Double Robe Hook 4” (100 mm) wide stainless steel bar forms hook at each end. Unit extends 1 5/8” (40 mm) from wall. Technical Data Sheet |
7385
Towel Ring For bath and hand towels. Ring is 4 1/2” (115 mm) wide, made of 1/4” (6 mm) diameter stainless steel bar. Projects 2 1/2” (65 mm) from wall. 5” (125 mm) high. Technical Data Sheet |
 |
 |
| 7305 *
Toilet Paper Holder- Single Roll Furnished with chrome-plated plastic rollers. Unit measures 2” (50 mm) high, 7 3/4” (200 mm) wide, projects 3 7/8” (100 mm) from wall. Holds 1800 sheet standard core roll. Technical Data Sheet |
7305-2 *
Similar to 7305, but for
two 1800 sheet standard core rolls, 13 1/2” (340 mm) wide.
|
 |
 |
| R009 *
Theft Resistant Spindle Available on any toilet paper holder indicated with an asterisk, by adding R009 suffix after model number. Technical Data Sheet |
7310
Towel Shelf with Towel Bar 8” (200 mm) deep consisting of four 3/8” diameter stainless steel tubes, with 1/4” (6 mm) diameter stainless steel towel bar below shelf, available 18” (460 mm) and 24” (610 mm). Overall height: 4 1/4” (110 mm); projects 8” (200 mm) from wall. Technical Data Sheet 7309
|
 |
 |
| 7355
Towel Bar-Round 3/4” (19 mm) diameter stainless steel towel bar. Available in 18”, 24” and 30” (460, 610 & 760 mm) lengths. Extends 3 1/4” (80 mm) from wall. Technical Data Sheet |
7360
Towel Bar-Square 3/4” (19 mm) stainless steel towel bar. Available in 18,” 24” and 30” (460, 610 & 760 mm) lengths. Extends 3 1/4” (80 mm) from wall. Technical Data Sheet |
 |
 7382
Hat and Coat Hook Double hook for both coats and hats, 5 1/4” H x 3” (135H x 75 mm) projection. Technical Data Sheet |
| 7380 (shown
above)
Stainless Steel Shelf Available in 18” and 24” (460 & 610 mm) lengths. Shelf, 5” (125 mm) wide, extends 6 1/8” (155 mm) from wall. Edges are roll-formed for safety. Technical Data Sheet |
 7303
Extra Roll Toilet Paper Holder Extra roll of paper is placed over the horn type holder. Stainless steel set screw on bottom of flange locks unit to mounting plate. Technical Data Sheet |
 |
 |
| 7404
Recessed Soap Dish Raised lip to retain soap. Wall opening: 5 1/2” x 5 1/2” x 2” (140 x 140 x 50 mm). Overall Size: 6 1/4” x 6 1/4” (160 x 160 mm). Technical Data Sheet |
7410
Recessed Soap Dish and Bar Same as 7404, but with 3/4” bar. Wall opening: 5 1/2” x 5 1/2” x 2” (140 x 140 x 50 mm). Overall Size: 6 1/4” x 6 1/4” (160 x 160 mm). Technical Data Sheet |
 |
 |
| 7402*
Recessed Toilet Paper Holder Spring loaded chrome roller. Wall opening: 5 1/2” x 5 1/2” x 2” (140 x 140 x 50 mm). Overall Size: 12 1/2” x 6 1/4” (320 x 160 mm). Technical Data Sheet 7402-H*
7402-SM*
|
74022*
Double roll Recessed Toilet Paper Holder Same as 7402 but for two rolls. Wall opening: 11 3/4” x 5 1/4” x 2” (300 x 135 50 mm). Overall Size: 12 1/2” x 6 1/4” (320 x 160). Technical Data Sheet 74022-H*
74022-HSM*
74022-SM*
|
 |
|
| 7403*
Extra Roll Recessed Toilet Paper Holder Stores extra roll. Wall opening: 5 1/2” x 5 1/2” x 4” (140 x 140 x 100 mm). Overall Size: 6 1/4” x 6 1/4” (160 x 160 mm). Technical Data Sheet |
|
|
|
|