Stainless Steel Grab Bars
SPECIFICATIONS
All grab bars are fabricated of satin finish 18 gauge type 304 stainless steel tubing.  Mandrel bending process ensures uniform bar diameters.  Bars pass through flanges and are heliarc welded to form a single structural unit.  Bars with 1 1/2" (38 mm) clearance from wall can support loads in excess of 900 lbs. (408 kg) when properly installed complying with structural strength requirements of ADA Guidelines.

Designers Note:
For a non-slip surface, specify suffix “P" (peened). 

When specifying grab bars insert the configuration type numbers into the double zeros at the end of the grab bar series number.
Example 1:
A 1 1/2" (38 mm) concealed 24" x 24" 
(610 x 610 mm) horizontal grab bar has a model number — 3242.  When a special size is needed add suffix “M" plus the size.
Example 2:
A 1 1/2" (38 mm) concealed 23" x 37" (585 x 940 mm) horizontal grab bar has a model number 3242-M2337.
 

To view and print a separate sheet containing the architectural Technical Data Sheet for each of our products, you will require Acrobat Reader.
If you need it, you can download it for FREE by clicking this logo. 
Snap Flange for Grab Bars
Concealed Mounting for Grab Bars
Exposed Mounting for Grab Bars
Snap Flange 

3700 Series — 1 1/4" 
(32 mm) o.d.
Technical Data Sheet
3800 Series — 1 1/2" 
(38 mm) o.d.
Technical Data Sheet

•  Cover snaps over mounting flange 
dimples to conceal screws. 
•  Concealed mounting flange is 3 1/8" (79 mm) o.d.diameter with two screw holes and three locking dimples and is 1/8" (3 mm) thick, type 304 stainless steel. 
•  Cover is type 304 stainless steel with satin finish, 22 gauge, 3 3/16" (81 mm) diameter.

 Concealed Mounting 

3100 Series — 1 1/4" 
(32 mm) o.d.
Technical Data Sheet
3200 Series — 1 1/2" 
(38 mm) o.d.
Technical Data Sheet

•  Flange is 3" (76 mm) diameter, 1/2" (13 mm) deep, 11 gauge type 304 stainless steel with satin finish. 
•  Tenon plate is 13 gauge with slotted screw holes. 
•  Flange is secured to concealed tenon plate with 3 stainless steel allen head screws.

 Exposed Mounting 

3400 Series —  1 1/4" 
(32 mm) o.d.
Technical Data Sheet
3500 Series — 1 1/2"
Technical Data Sheet
(38 mm) o.d. 
•  Flange is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel with a satin finish. 
•  Exposed mounting screw holes are drilled and countersunk.
Grab Bar Configurations

Standard grab bars are available in all series, except type 53 and 54, which are only available in 3400 series.

The following standard shapes are typical configurations.

When handling is not noted, same bar can be mounted either right or left hand.

Grab bars can be custom designed and manufactured 
to meet any specific architectural requirement.
Home | Toilet and Washroom Accessories | Products | Contact Us | Order