Security Accessories

For correctional, psychiatric, school, park, and service station type installations.
Type 304 stainless steel is used exclusively, in extra heavy gauges. Glass blasted and satin finishes provide for easy maintenance. Continuous welding for tamper-resistance.

To view and print a separate sheet containing the architectural Technical Data Sheet for each of our products, you will require Acrobat Reader.
If you need it, you can download it for FREE by clicking this logo.

165
Grab Bar — Front Mounting

Tubing 18 gauge and flanges 1/8“ (3 mm) thick stainless steel
type 304 with satin finish. Closure plate is 1/8" (3 mm) thick.
All welded construction.
Unit has 3 holes through each flange for front mounting.

Specify wall thickness for length of welded-on 1/4"
(6 mm) — 20 threaded rods, washers and nuts

NOTE: Following are standard models and sizes.
Other sizes are available on request.
Sizes are measured center line of flanges.
Technical Data Sheet

Model Number	Description
160 Technical Data Sheet	Grab Bar, 24" (610 mm)- Rear Mount
165 Technical Data Sheet	Grab Bar, 24" (610 mm)- Front Mount
161 Technical Data Sheet	Grab Bar, 30" (760 mm)- Rear Mount
162 Technical Data Sheet	Grab Bar, 30" (760 mm)- Front Mount
163 Technical Data Sheet	Grab Bar, 36" (915 mm)- Rear Mount
164 Technical Data Sheet	Grab Bar, 36" (915 mm)- Front Mount
166 Technical Data Sheet	Grab Bar, 42" (1070 mm)- Rear Mount
167 Technical Data Sheet	Grab Bar, 42" (1070 mm)- Front Mount
168 Technical Data Sheet	Grab Bar, 48" (1220 mm)- Rear Mount
169 Technical Data Sheet	Grab Bar, 48" (1220 mm)- Front Mount

110-1 Square Recessed Toilet Paper Holder Rear Mounting

110
Recessed Toilet Paper Holder — Rear Mounting

Fabricated of 16 gauge type 304 stainless steel, satin finish exterior, glass blasted satin finish interior. 4 1/2" (115 mm) interior depth accommodates one standard toilet paper roll. Hidden contraband causes roll to project from holder allowing detection. Two “T" nuts welded on back for rear mounting.
Wall Opening: 5 3/4"
(145 mm) diameter x
wall thickness.
Overall Size:
7 1/4” (185 mm) diameter.
Technical Data Sheet

110-1
Square Recessed Toilet Paper Holder — Rear Mounting

Fabricated of 14 gauge type 304 stainless steel with satin finish exterior, glass blasted satin finish interior 4 1/2" (115 mm) deep accommodates one standard toilet paper roll. Flange is 7" (180 mm) square. Hidden contraband causes roll to project from holder allowing detection. Two “T" nuts welded on back for rear mounting.
Wall Opening:
5 1/2" (140 mm) diameter x wall thickness.
Overall Size:
7" x 7” (180 x 180 mm).
Technical Data Sheet

170 Retractable Shower Seat Front Mounting

140
Rear Mounting Recessed Soap Dish
Soap dish 16 gauge stainless steel type 304 with satin finish. One piece drawn construction with beveled trim and embossments for air circulation and drainage. Unit has two “T" nuts welded on back for rear mounting.
Wall Opening:
6 1/2" x 5" (165 x 130 mm) wall thickness.
Overall Size:
7 3/8” x 6” (215 x 155 mm).
Technical Data Sheet

111
Front Mounting POST Type Surface Mounted Toilet Paper Holder
Fabricated of 18 gauge 11/4" (32 mm) OD stainless steel type 304 with satin finish. Flange is 3" (76 mm) dia x 1/8 " (3 mm) thick and has
3 countersunk holes for front mounting.
Overall Size:
4 1/2" x 3 3/4" (115 x 95 mm) projection.
Technical Data Sheet

170
Retractable Shower Seat — Front Mounting
Seat folds up into cabinet, both fabricated of
16 gauge stainless steel, exposed surfaces
have a satin finish.
Seat has reinforced
channels. Wall sub frame furnished,
with welded on
masonry anchors.
Sub Frame Opening:
15 " x 15 " x 2 3/4"
(380 x 380 x 70 mm).
Technical Data Sheet

Mounting Methods

Rear mounting for walls up to 6" (150 mm) thick:
"T" nuts and 1/4 - 20 threaded rods, nuts, washers and steel mounting channel provided.
Rear mounting for walls 6" (150 mm) thick and over: "T" nuts and 1/4 - 20 threaded rods, nuts, washers and steel mounting channel provided.
Front mounting:
TORX head machine screws, 1/4 - 20 x 2" (50 mm) long, furnished. (Anchors to suit field
conditions by others.)

Anchoring Information

A. Front mounted units are furnished with TORX vandal resistant 1/4 - 20 x 2" (50 mm) machine screws. Wall anchors are not furnished with accessory.

B. Rear mounted units are furnished with "T" nuts and 1/4 - 20 threaded rods with nuts and washers to suit 6" (150 mm) walls. Specify if walls are greater than 6" (150 mm).

C. Wall Sleeves (optional). Recommended for mounting of accessories in poured, or precast concrete walls. Fabricated of Paintlok steel, all welded construction with mounting holes for attachment to forms.

101
Framed Mirror - Rear Mounting
Frame 14 gauge type 304 stainless steel with satin finish, corners welded and ground smooth. Unit provided with fiberboard backing and 6 "T" nuts welded on back for rear mounting. (Specify glazing suffix required and also specify wall thickness if greater than 6"
(50 mm).)
Overall Size:
12" x 16" x 5/8"
(305 x 405 x 16 mm).
Technical Data Sheet

104
Framed Mirror-Front Mounting
Unit consist of wall mounting plate fabricated of 7 gauge type 304 stainless steel with 4 countersunk mounting holes and 8 tapped holes. Formed mirror fabricated of 18 gauge type 304 stainless steel with No. 8 mirror polish finish provided with 8 dimpled holes through integral frame and
1/4 -20 x 1/4" TORX head screws for securing to wall mounting plate.
Overall Size:
10 1/16" x 11 9/16 x 7/16"
(255 x 290 x 11 mm).
Technical Data Sheet

105
Framed Mirror - Front Mounting
Similar to 101, but front mounting, finished with TORX vandal resistant
1/4-20x 2" (50 mm) machine screws.
Technical Data Sheet

107
One Piece Framed Mirror with Rounded Corners - Front Mounting
One piece 18 gauge type 304 stainless steel formed mirror with No. 8 mirror polish finish, integral frame, rounded corners and 6 mounting holes.
Overall Size:
12" x 16" x 1/4"
(305 x 405 x 6 mm).
Technical Data Sheet

108
(Not Shown)
One Piece
Framed Mirror with Rounded Corners - Rear Mounting
Same as 107 with 6 "T" nuts welded on back for rear mounting.
Technical Data Sheet

Designers Note
Specify:

Mirror Glazing Options

14: 20 gauge type 304 stainless steel, No. 8 mirror polish finish. reflective quality: very good.
30: 20 gauge type 430 stainless steel, bright annealed. reflective quality: good.

Clothes/Towel Hooks/Shelves

127
Clothes/Towel Hook Strip — Front Mounting
Wall plate 14-gauge with beveled edges, 11-gauge brackets, and 4, 7-gauge hooks. Stainless steel type 304 with satin finish. Hooks snap down for safety if excessively loaded. Unit has 6 mounting holes through back for front mounting.
Overall Size:
11" x 51/2" x 3 1/8" (280 x 140 x 80 mm) projection.
Technical Data Sheet

129
Clothes/Towel Hook Strip — Front Mounting
Fabricated of 12 gauge stainless steel type 304 with satin finish. Back plate of 14 gauge stainless steel. Hooks snap down for safety if excessively loaded. Six holes through back for front mounting.
Overall Size:
18" long x 5 1/2" x 2 1/8" (460 x 140 x 55 mm) projection.
Technical Data Sheet

122
Square Clothes Hook — Rear Mounting
Constructed of 12 gauge stainless steel type 304L with a No. 4 finish. Back plate is fabricated of 14 gauge stainless steel. If hook is excessively loaded, it will snap down for safety. Unit has four studs welded on back for rear mounting.
Overall Size:
4 1/4" x 4 1/4" x 2 1/8"
(110 x 110 x 55 mm).
Technical Data Sheet

123
Square Clothes Hook — Front Mounting
(Not Shown)
Similar to 122, except with four holes for front mounting.
Technical Data Sheet

120
Clothes Hook — Front Mounting
Bracket 11 gauge, hook 7 gauge type 304 stainless steel with satin finish. If hook is excessively loaded, it will snap down for safety. Unit has four holes through flange for front mounting.
Overall Size:
3" x 5" x 3 1/16" (75 x 130 x 80 mm) projection.
Technical Data Sheet

121
(Not Shown)
Clothes Hook — Rear Mounting
Similar to 120, but with four studs welded to back for rear mounting.
Technical Data Sheet

117
Folded Toilet Tissue Holder — Front Mounting
Holder is 14 gauge type 304 stainless steel, satin finish. Open design for detection of contraband. Provided with 4 mounting holes for front mounting.
Overall Size:
4 3/4" x 9" x 2 3/4"
(120 x 230 x 70 mm).
Technical Data Sheet

130
Recessed Shelf — Rear Mounting
Shelf 16 gauge stainless steel type 304L, corners welded and ground smooth. 1" (25 mm) wide beveled No. 4 satin finish trim. Interior glass blasted satin finish. Unit has four studs welded on back for rear mounting.
Wall Opening:
16 1/2" x 5 1/2" (420 x 140 mm)
x wall thickness.
Technical Data Sheet

128-1
Book Shelf/Clothes Hook — Front Mounting
Shelf and back plate are 14 gauge stainless steel type 304 with satin finish. Hooks are 12 gauge stainless steel and back plate is 14 gauge stainless steel. Seams are welded and ground smooth. Hooks snap down for safety if excessively loaded. Unit has 6 holes through back for front mounting.
Overall Size:
18" x 11" x 8" (460 x 280 x 200 mm)
Technical Data Sheet

137
Book Shelf/Clothes Hook Strip — Front Mounting
Book shelf and back plate are fabricated of
14 gauge stainless steel type 304 with satin finish. Hooks are 7 gauge and brackets are 11 gauge stainless steel. Hooks snap down for safety if excessively loaded. Unit has 6 holes through back for front mounting.
Overall Size:
18" long x 11" high x 8" deep (460 x 280 x 200 mm).
Technical Data Sheet

Home | Toilet and Washroom Accessories | Products | Contact Us | Order